Filler.

Article
Productname
Type
Description
TM
SDB
F418
FEYCOPUR 418
2K PU ESD-Füller
 
ESD primer filler for use as a sanding filler or wet-in-wet filler with very good electrical conductivity
Technical Data Sheet present
F4817750
RELADUR 481 PU-Spray Putty
 
Putty and filler in paint system for aircraft propeller
Technical Data Sheet present
F619
FEYCOPUR 619
2K PU Filler
 
Excellent filling property, can be very quickly recoated or applied wet in wet,
Technical Data Sheet present
F681
REDOCRYL HS 681
Filler
 
2K acrylic filler with very good adhesion on steel, galvanized parts and aluminum. Excellent corrosion protection, no additional primer needed, good filling properties.
Technical Data Sheet present
F684
REDOCRYL HS 684
VOC Sanding Filler
 
Good filling properties and easy sandable.
To be used as compact filler and high build filler.
Technical Data Sheet present
F685
REDOCRYL HS 685
VOC Multi Filler
 
Recoatable with 1K- and 2K products
For direct use on steel, galvanized steel, aluminum and many plastic substrates (PP-EPDM, ABS, PC, ABS-PC, PMMA, PUR, PVC, GRP).
One filler for all jobs at the body shop!
Technical Data Sheet present
F688
REDOCRYL HS 688
VOC Sanding and Primer Filler
 
Good filling properties and easy sandable, with active corrosion protection
Technical Data Sheet present
F690
REDOCRYL HS 690
VOC Wet-on-wet Filler
 
2K acrylic filler with very good adhesion on steel, galvanized parts and aluminum for wet-on-wet application with fast recoatability.
Technical Data Sheet present
F81421704
REDOCAR 1K Speed Filler Spray
 
Strong filling, with very quick drying, fast and easy to sand, resistant to silicone remover.
Very fine atomization, so that in the spot repair area discharge zones are possible without large spray mist.
Technical Data Sheet present
F81427601
REDOCAR 1K EP Filler Spray
 
Strong filling, with very quick drying, easy to sand,very good corrosion protection,
Very fine atomization, so that in the spot repair area discharge zones are possible without large spray mist, which means less effort during intermediate sanding.
Technical Data Sheet present
F900600
REDOCAR HS 600
VOC 2K-PE Filler
 
This product is suitable for a single operation in the filling of irregularities, deep sanding traces as well as rough pre-worked repairs. Incl. CHP-hardener
Technical Data Sheet present
F900601
REDOCAR
2K Spray Filler 600
Aerosol
 
Bumps, strong grinding marks or roughly pre-worked repair spots can be coated in one operation
Technical Data Sheet present
F900650
REDOCAR HS 650
VOC 2K-PE Filler
 
This product is suitable for a single operation in the filling of irregularities, deep sanding traces as well as rough pre-worked repairs. Incl. CHP-hardener
Styrene content: < 10%
Technical Data Sheet present
F900810
FEYCARBON 810
2K PE Filler
 
This product is suitable for a single operation in the filling of irregularities, deep sanding traces as well as rough pre-worked repairs. Incl. CHP-hardener