Floor Coatings.

Floor coatings for indoor or outdoor use must meet a wide variety of requirements. In addition to UV resistance, chemical and mechanical resistance, slip resistance and much more, they should at the same time offer design and architectural scope to meet aesthetic and decorative purposes.

Our range of impregnations, primers, floor paints, flow and roller coatings, as well as sealers and marking paints covers the needs from basement floors to workshops to heavy-duty industrial floors.


Our consultans ara available to assist for selecting the right products.

 

For Floor Coatings we carry the following products:

Floor Coating-Primer Floor Coating-Self levelling coating Floor Coating-Top coat Floor Coating-Sealer Floor Coating-Hardener + Thinner Floor Coating-Additives
Article
Productname
Type
Description
TM
SDB
F05560
RELAFLOOR 5560
3K EP Mortar Set
 
Pre-dosed EP mortar consisting of resin, hardener and quartz sand in the correct mixing ratio
F05560A
RELAFLOOR 5560 Resin
 
Resin component A for RELAFLOOR 5560
F05560B
RELAFLOOR 5560 Hardener
 
Hardener component B for RELAFLOOR 5560
F05560C
RELAFLOOR 5560 Silica Sand Mixture
 
Sand mixture C for RELAFLOOR 5560
F05570
RELAFLOOR 5570
2K EP HS Self Levelling Compound
glossy
 
Universal leveling compound for interiors with high mechanical and chemical load.
It can be used both as a screed substitute and as a primer for mineral surfaces.
F09900
RELAFLOOR 9900
Thixotropic Agent
 
To increase the sagging stability of primers or top coatings
F09910
RELAFLOOR 9910
Anti Slip Additive Fine
0,15 mm
 
Anti-slip additive fine for addition to the coating material prior to application
F09920
RELAFLOOR 9920
Anti Slip Additive Rough
0,5 mm
 
Anti-slip additive rough for addition to the coating material prior to application
F09930
RELAFLOOR 9930
Quartz Sand Fine
0,1 - 0,3 mm
 
Filler fine for addition to the coating material
F09940
RELAFLOOR 9940
Quartz Sand Medium
0,3 - 0,8 mm
 
Sand for sprinkling primer and for anti-slip surfaces by rating group R11 and R12, filler for the production of fine EP-mortars.
F09950
RELAFLOOR 9950
Quartz Sand Rough
1,0 - 2,0 mm
 
Filler rough for addition to the coating material
F09960
RELAFLOOR 9960
Quartz Sand Mixture
0,1 - 2,0 mm
 
Filler mixture for addition to the coating material
F175
RELAFAN 175
Sealer Concentrate
 
Sealing for screw thread
F176
RELAFAN 176
Edge Sealer
 
For sealing the edges of gypsum boards, MDF panels and chipboards.